Quartz Rod
Technical glass
High-purity fused quartz (SiO2)
Fused quartz consists of pure silica (SiO2). Our solid quartz rod withstands temperatures above 1.300°C and, thanks to its low coefficient of thermal expansion, can be heated and cooled without risk of breakage from thermal shock.
Product
Advantages and applications
Description
Solid fused quartz glass rod (fused silica) with an extremely low coefficient of thermal expansion. It withstands temperatures of 1100 ºC in long-term use and up to 1300 ºC in short-term use. Available in diameters from 1 to 30 mm and lengths of up to 2000 mm.
We can cut the rods to shorter lengths, weld them and give them any type of finish.
Applications
What it is used for
- 01 Solid pieces for high-temperature processes
- 02 Semiconductor industry
- 03 Lighting and UV applications
- 04 Laboratory instruments and equipment
- 05 Custom welded quartz pieces
Specifications
Technical documentation
Properties
Properties of fused quartz
-
Trace elements in ppm. Higher grades available to order.
Al Fe Ca Ti Na K Li OH⁻ 16 0.8 0.8 1.5 0.9 0.9 0.7 15–45 -
The OH⁻ content of 15 to 45 ppm is stable. Heat treatment can reduce it to a maximum of 3 ppm by annealing the material at 1000 ºC for 30 hours.
-
Property Value Mean coefficient of linear thermal expansion (20–300 ºC) 0.55 · 10⁻⁶ /ºC Transformation temperature range 1075–1210 ºC Lower annealing temperature (lg η = 14.5 dPa·s) 1075 ºC Upper annealing temperature (lg η = 13.0 dPa·s) 1180 ºC Softening temperature (lg η = 7.6 dPa·s) 1730 ºC Working temperature range (lg η = 5–8 dPa·s) 1700–2100 ºC Maximum permissible temperature, long-term use 1100 ºC Maximum permissible temperature, short-term use 1300 ºC -
Property Value Density 2.20 g/cm³ Compressive strength 1150 N/mm² Tensile strength 50 N/mm² Flexural strength 68 N/mm² Modulus of elasticity E 7.5 · 10⁴ N/mm² Scratch resistance (Mohs) 5.5–6.5 Mechanical properties depend on geometry, surface quality and temperature.
-
Property Class Hydrolytic class (DIN 12 111) 1 Acid resistance class (DIN 12 116) 1 Alkali resistance class (DIN 52 322) 1 Because of its resistance to water, saline solutions and acids, the chemical industry uses quartz in laboratory instruments and equipment.
-
Fused quartz is characterised by high dielectric strength, low electrical conductivity and good microwave transmission, even at high temperatures.
Property Value Dielectric loss factor tan δ (7.5 GHz) 5 · 10⁻⁴ Dielectric constant (20 ºC / 7.5 GHz) 3.7 Dielectric strength at 20 ºC 250–400 kV/cm Dielectric strength at 500 ºC 40–50 kV/cm Temperature (ºC) Specific electrical resistance (Ω·cm) 20 10¹⁸ 100 10¹⁸ 200 4 · 10¹³ 400 10¹⁰ 800 6.3 · 10⁸ 1000 10⁸ 1200 4 · 10⁵ -
Its good optical transmission of ultraviolet rays makes quartz glass an essential material for the lighting industry.
Reply within 24h
Request information
Tell us what you need about Quartz Rod — technical information, a sample or a quote — and we will reply as soon as possible.