Duran® Borosilicate 3.3 Rods
Technical glass
DURAN® borosilicate of the 1st hydrolytic class
Duran glass is a special borosilicate glass that falls within the 1st hydrolytic class. Today, Duran tubing, capillaries and rods are essential in laboratories and in chemical plant engineering, and form the basis for custom solutions. Duran has a mean coefficient of linear expansion of 3.3.
Product
Advantages and applications
Description
Solid DURAN borosilicate 3.3 glass rod, with the same chemical and thermal resistance as DURAN tubing. Available in diameters from 3 to 30 mm and approximate length of 1500 mm.
Like DURAN tubing, it is a hydrolytic class 1 glass that is highly resistant to corrosion, with neutral behaviour even against aggressive chemicals. It is also manufactured in a prestressed version to withstand greater tensile stress.
Its applications cover laboratories, chemical plants, glass crafts and lighting.
Applications
What it is used for
- 01 Laboratory materials and apparatus
- 02 Chemical plants
- 03 Crafts: candlesticks, goblets and unique pieces
- 04 Lighting
Specifications
Technical documentation
Technical Data
Manufacturing tolerancesCheck the dimensional, mechanical and finish tolerances that apply to this product: length, roundness, straightness, tensile strength and packaging conditions.
Duran® Borosilicate 3.3 Rods
Check the available sizes and request more information about this product.
-
The standard lengths are as follows:
- Tubing
- 1500 mm (+10/-0 mm)
- Rods
- 1500 mm (±30 mm)
Made to order, we supply tubing in special lengths (depending on outside diameter) from 1000 to 7500 mm. Tubing, capillaries and rods can be cut to any length.
-
The circumference line of each cross-section of a part under inspection must lie between two concentric circles in the same plane, a distance t apart. In accordance with ISO 1101, this tolerance band t represents the roundness tolerance. It depends on the nominal value of the outside diameter (OD). The following maximum values are specified:
- Tubing — OD < 200 mm
- 0.7% of outside diameter
- Tubing — OD ≥ 200-325 mm
- 1.0% of outside diameter
- Capillaries — OD < 10 mm
- 1.0% of outside diameter
- Rods — OD < 20 mm
- 1.0% of outside diameter
- Rods — OD ≥ 20-30 mm
- 1.5% of outside diameter
-
A wall thickness deviation of more than 12% of the nominal wall thickness, measured on the measuring plane, is not permitted.
-
Straightness according to ISO 1101 is the maximum distance of the surface points of a part under inspection from an adjacent line of ideal geometric form. Projected onto a plane, this is the tolerance band t, which is bounded by two parallel straight lines. The following maximum values are specified:
- 3 – <6 mm
- 4.0 mm / 1500 mm
- ≥6 – <30 mm
- 1.5 mm / 1000 mm
- ≥30 – <100 mm
- 2.0 mm / 1400 mm
- ≥100 – <200 mm
- 2.5 mm / 1400 mm
- ≥200 mm
- 3.0 mm / 1400 mm
-
- WT < 2 mm
- Longitudinal: 3.0 MPa · Marginal: 4.0 MPa
- WT 2 – 4 mm
- Longitudinal: 2.0 MPa · Marginal: 3.0 MPa
- WT > 4 mm
- Longitudinal: 1.5 MPa · Marginal: 2.5 MPa
-
Stones are non-transparent inclusions; knots are transparent inclusions. Stones and knots with a core size of ≥ 0.5 mm are considered defects.
- OD < 0.3 mm
- permitted
- OD ≥ 0.3 – <1.0 mm
- max. 2
- OD ≥ 1.0 – ≤2.0 mm
- max. 1
- OD > 2.0 mm
- not permitted
- OD < 0.3 mm
- permitted
- OD ≥ 0.3 – <1.0 mm
- max. 4
- OD ≥ 1.0 – ≤3.0 mm
- max. 2
- OD > 3.0 mm
- not permitted
-
The sum of the lengths of all bubbles of ≥ 20 mm must not exceed 0.8 m / 10 m of tubing. Bubbles < 20 mm: max. 20 bubbles / kg of glass. Bubbles wider than 1.0 mm are not permitted for an OD ≤ 100 mm. Bubbles wider than 2.0 mm are not permitted for an OD > 100 mm.
-
Standard packaging: cardboard boxes. Made to order: Densopack. The tubes are stacked on top of one another in formations with a rectangular cross-section, so that their geometric arrangement makes maximum use of space. Both ends are shrink-wrapped with a transparent film. This prevents the tubes from shifting during transport and makes them more stable and resistant. The film shrink-wrapped at both ends seals each tube and provides optimal protection against contamination by dirt.
Properties
Borosilicate 3.3
- Coeff. of expansion 20/300 [10⁻⁶·K⁻¹]
- 3.3
- Transformation temp. (°C)
- 525
- Annealing / strain point temp. (°C)
- 560
- Softening temp. (°C)
- 825
- Working temp. (°C)
- 1260
- Max. temp., long-term (°C)
- 450
- Max. temp., short-term (°C)
- 500
- Refractive index nd
- 1.473
- Thermal conductivity
- 1.2
- Elastic modulus E (10⁴ N/mm²)
- 6.4
- Poisson's ratio μ
- 0.20
- Hydrolytic class
- HGB 1
- Acid resistance
- S 1
- Alkali resistance
- A 2
Reply within 24h
Request information
Tell us what you need about Duran® Borosilicate 3.3 Rods — technical information, a sample or a quote — and we will reply as soon as possible.