AR-Glas® Soda-lime 9.1 Rods
Technical glass
AR-GLAS® 9.1 soda-lime glass
AR-Glas is a clear glass of the third hydrolytic class and belongs to the soda-lime glasses with a high percentage of alkali and alkaline-earth oxides. AR-Glas has a mean coefficient of linear expansion of 9.1.
Product
Advantages and applications
Description
AR-GLAS soda-lime glass solid rod, with good dimensional accuracy and an optimal quality-to-price ratio. Available in diameters from 3 to 25 mm.
Like AR-GLAS tubing, it is a soda-lime glass of the 3rd hydrolytic class backed by the DIN ISO 9001 quality system (TÜV-Cert), with applications ranging from laboratory and pharmacy to crafts and decoration.
Applications
What it is used for
- 01 Laboratory ware
- 02 Technical products
- 03 Crafts and Christmas ornaments
- 04 Lighting and decoration
Specifications
Technical documentation
Technical Data
Manufacturing tolerancesCheck the dimensional, mechanical and finish tolerances that apply to this product: length, roundness, straightness, tensile strength and packaging conditions.
AR-Glas® Soda-lime 9.1 Rods
Check the available sizes and request more information about this product.
-
Outside diameter and wall thickness as per the AR-Glas Tubing and AR-Glas Rod tables. On request we can supply tubes with an outside diameter of up to 70 mm and rods with an outside diameter of up to 30 mm, as well as wall thicknesses in addition to those included in the range shown.
-
Standard lengths are as follows:
- Tubes
- 1500 mm (+5/-0 mm)
- Rods
- 1500 mm (±20 mm)
For tubes with outside diameters from 18 to 38 mm, special lengths from 1.200 to 4.000 mm can be requested. To order, we supply tubes and rods in any length shorter than 1500 mm.
-
The circumference line of each cross-section of a piece under inspection must lie between two concentric circles in the same plane, at a distance t from each other. In accordance with ISO 1101, this tolerance zone t represents the roundness tolerance. It depends on the nominal value of the outside diameter (OD). The following maximum values are set:
- < 25 mm
- 0.4% of the outside diameter
- 25 – 35 mm
- 0.6% of the outside diameter
- > 35 mm
- 0.8% of the outside diameter
-
Wall thickness difference is the difference between the maximum and minimum wall thickness in one measuring plane.
- < 0.80 mm
- 6% of the wall thickness
- ≥ 0.80 mm
- 7% of the wall thickness
-
Straightness in accordance with ISO 1101 is the maximum distance of the surface points of a piece under inspection from an adjacent line of ideal geometric form. Projected onto a plane, this is the tolerance zone t, bounded by two parallel straight lines. The following maximum values are set:
- 4 – 6 mm
- 4.0 mm / 1500 mm
- > 6 mm
- 0.9 mm / 1000 mm
-
- Longitudinal
- max. 4.0 MPa
- Concentric
- max. 4.5 MPa
-
Stones are non-transparent inclusions; knots are transparent inclusions. They are defect indicators that depend on the glass mass. The core is taken as the basis for measurement. Stones and knots with a core size ≥ 0.5 mm are considered defects.
-
Cords are elongated gaseous inclusions inside the tube, which normally cannot be detected by the human eye. We call the sum of the lengths of all cords > 15 mm the cord length (that is, where two or more cords overlap, the distance between the outer ends of the cords). We consider an accumulated cord length > 1.00 m per 10 m of tube to be a defect.
-
Tubes. End finish: cut ends or flame-polished ends. Standard: vial-type flame polishing with a rim thickness of 0.15 mm.
- Light flame polishing
- 0.05 mm
- Medium flame polishing
- 0.10 mm
- Heavy flame polishing
- 0.20 mm
Rods. No finishing.
-
A scratch is slight surface damage that does not penetrate deeply into the glass wall or go through it, and so reduces the mechanical strength of the glass only very insignificantly.
-
Tubes of up to 8 mm outside diameter are supplied packed in cardboard boxes; all others are supplied in Densopack packaging: a film is shrink-wrapped over each end of the tube bundles, which prevents the tubes from slipping and getting scratched. This method offers greater load resistance and improved safety during transport.
Properties
Soda-lime 9.1
- Coeff. of expansion 20/300 [10⁻⁶·K⁻¹]
- 9.1
- Transformation temp. (°C)
- 525
- Annealing / strain point temp. (°C)
- 530
- Softening temp. (°C)
- 720
- Working temp. (°C)
- 1040
- Max. temp., long-term (°C)
- —
- Max. temp., short-term (°C)
- 450
- Refractive index nd
- 1.514
- Thermal conductivity
- 1.1
- Elastic modulus E (10⁴ N/mm²)
- 7.3
- Poisson's ratio μ
- 0.22
- Hydrolytic class
- HGB 3
- Acid resistance
- S 1
- Alkali resistance
- A 2
Reply within 24h
Request information
Tell us what you need about AR-Glas® Soda-lime 9.1 Rods — technical information, a sample or a quote — and we will reply as soon as possible.