Skip to content
Vidrasa

Duran® Borosilicate 3.3 Tubes, 2000 mm

Technical glass

DURAN® tubing in 2000 mm length

DURAN borosilicate 3.3 glass tubes with an approximate length of 2000 mm, for industrial applications. Same hydrolytic class 1 glass and mean coefficient of linear expansion of 3.3 as the standard 1500 mm DURAN tubing.

Duran® Borosilicate 3.3 Tubes, 2000 mm

Product

Advantages and applications

The advantages

Duran products stand out for their stability, ease of processing and high tolerance to sudden temperature changes. They are corrosion-resistant, behave neutrally towards acids, salts and organic solvents, and offer very high dimensional accuracy.

Quality

Duran tubing, capillaries and rods are manufactured using state-of-the-art technology, in compliance with international standards such as DIN ISO 3585 and ASTM E438 type 1 class A. The entire production process is electronically controlled under a continuous quality system.

Applications

Its main applications are in laboratories and the chemical industry: from test tubes to cooling, distillation and wastewater treatment equipment. It is also used in environmental engineering, crafts and lighting.

Description

Duran is a special borosilicate glass of the 1st hydrolytic class, with a mean coefficient of linear expansion of 3.3. Its tubing, capillaries and rods are essential in laboratories and in chemical plant engineering.

It stands out for its stability, ease of processing and high tolerance to sudden temperature changes. It is corrosion-resistant and remains neutral even when exposed to aggressive chemicals.

Its applications range from laboratory equipment (test tubes, filtration apparatus, cooling and distillation equipment) to large chemical and water treatment plants, pipelines, measurement and control technology, solar collectors, heat exchangers, explosion-proof tubing and flowmeters. It is also used in glass crafts (candlesticks, goblets) and lighting.

Its main chemical composition is SiO₂ 81%, B₂O₃ 13%, Na₂O+K₂O 4% and Al₂O₃ 2%. It complies with the international standards DIN ISO 3585 and ASTM E438 (type I, class A), with a characteristic pressure resistance value of K/S = 7 N/mm² according to DIN EN ISO 1595 and resistance to sudden temperature changes in accordance with DIN ISO 718. We can calculate the pressure or thermal shock resistance of a specific size on request.

The standard length is 1500 mm for tubing and 1500 mm for rods; made to order, we supply tubing in special lengths from 1000 to 7500 mm (depending on diameter), including the 2000 mm variant. Tubing, capillaries and rods can be cut to any length.

Applications

What it is used for

  • 01 Laboratory: test tubes, filtration, cooling and distillation
  • 02 Chemical plants and wastewater treatment
  • 03 Pipeline construction, measurement and control
  • 04 Environmental engineering: solar collectors and flue gas desulphurisation
  • 05 Heat exchangers, explosion-proof tubing and flowmeters
  • 06 Crafts and lighting

Specifications

Duran combines thermal stability and chemical resistance

Made from borosilicate 3.3 glass, with a coefficient of expansion of 3.3·10⁻⁶ K⁻¹ and hydrolytic class HGB 1, it delivers reliable performance in demanding laboratory and industrial applications.

Dimensions

Find your size

Check the available sizes and take the following notes into account before placing your order.

  • Tube length approx. 2000 mm.
  • The quantities and weights stated are approximate values.
  • In addition to the sizes listed, others can be supplied depending on quantity.
Request a quote
Outside diameter
Wall thickness (mm)
Weight per tube
Box contents
mm mm g / 1500 mm Number of tubes Approx. weight kg
9.5 ±0.18 1.5 ±0.10 168 100 16.8
11.5 ±0.18 1.5 ±0.10 210 64 13.4
12.5 ±0.18 1.5 ±0.10 231 49 11.2
13.5 ±0.18 1.75 ±0.10 288 49 14.1
14.5 ±0.18 2.25 ±0.15 386 36 13.9
15.5 ±0.18 2.25 ±0.15 418 25 10.4
18.5 ±0.18 2.25 ±0.15 512 20 10.2
19.5 ±0.18 2.25 ±0.15 544 25 13.6
20.5 ±0.25 2.5 ±0.15 630 16 10.1
24.5 ±0.25 2.5 ±0.15 770 16 12.3
29.5 ±0.30 2.75 ±0.20 1030 9 9.3
34.5 ±0.45 2.75 ±0.20 1223 9 11
39.5 ±0.45 3 ±0.20 1533 9 13.8

Technical Data

Manufacturing tolerances

Check the dimensional, mechanical and finish tolerances that apply to this product: length, roundness, straightness, tensile strength and packaging conditions.

Duran® Borosilicate 3.3 Tubes, 2000 mm

Duran® Borosilicate 3.3 Tubes, 2000 mm

Check the available sizes and request more information about this product.

  • The standard lengths are as follows:

    Tubing
    1500 mm (+10/-0 mm)
    Rods
    1500 mm (±30 mm)

    Made to order, we supply tubing in special lengths (depending on outside diameter) from 1000 to 7500 mm. Tubing, capillaries and rods can be cut to any length.

  • The circumference line of each cross-section of a part under inspection must lie between two concentric circles in the same plane, a distance t apart. In accordance with ISO 1101, this tolerance band t represents the roundness tolerance. It depends on the nominal value of the outside diameter (OD). The following maximum values are specified:

    Tubing — OD < 200 mm
    0.7% of outside diameter
    Tubing — OD ≥ 200-325 mm
    1.0% of outside diameter
    Capillaries — OD < 10 mm
    1.0% of outside diameter
    Rods — OD < 20 mm
    1.0% of outside diameter
    Rods — OD ≥ 20-30 mm
    1.5% of outside diameter
  • A wall thickness deviation of more than 12% of the nominal wall thickness, measured on the measuring plane, is not permitted.

  • Straightness according to ISO 1101 is the maximum distance of the surface points of a part under inspection from an adjacent line of ideal geometric form. Projected onto a plane, this is the tolerance band t, which is bounded by two parallel straight lines. The following maximum values are specified:

    3 – <6 mm
    4.0 mm / 1500 mm
    ≥6 – <30 mm
    1.5 mm / 1000 mm
    ≥30 – <100 mm
    2.0 mm / 1400 mm
    ≥100 – <200 mm
    2.5 mm / 1400 mm
    ≥200 mm
    3.0 mm / 1400 mm
  • WT < 2 mm
    Longitudinal: 3.0 MPa · Marginal: 4.0 MPa
    WT 2 – 4 mm
    Longitudinal: 2.0 MPa · Marginal: 3.0 MPa
    WT > 4 mm
    Longitudinal: 1.5 MPa · Marginal: 2.5 MPa
  • Stones are non-transparent inclusions; knots are transparent inclusions. Stones and knots with a core size of ≥ 0.5 mm are considered defects.

    OD < 0.3 mm
    permitted
    OD ≥ 0.3 – <1.0 mm
    max. 2
    OD ≥ 1.0 – ≤2.0 mm
    max. 1
    OD > 2.0 mm
    not permitted
    OD < 0.3 mm
    permitted
    OD ≥ 0.3 – <1.0 mm
    max. 4
    OD ≥ 1.0 – ≤3.0 mm
    max. 2
    OD > 3.0 mm
    not permitted
  • The sum of the lengths of all bubbles of ≥ 20 mm must not exceed 0.8 m / 10 m of tubing. Bubbles < 20 mm: max. 20 bubbles / kg of glass. Bubbles wider than 1.0 mm are not permitted for an OD ≤ 100 mm. Bubbles wider than 2.0 mm are not permitted for an OD > 100 mm.

  • Standard packaging: cardboard boxes. Made to order: Densopack. The tubes are stacked on top of one another in formations with a rectangular cross-section, so that their geometric arrangement makes maximum use of space. Both ends are shrink-wrapped with a transparent film. This prevents the tubes from shifting during transport and makes them more stable and resistant. The film shrink-wrapped at both ends seals each tube and provides optimal protection against contamination by dirt.

Properties

Borosilicate 3.3

Coeff. of expansion 20/300 [10⁻⁶·K⁻¹]
3.3
Transformation temp. (°C)
525
Annealing / strain point temp. (°C)
560
Softening temp. (°C)
825
Working temp. (°C)
1260
Max. temp., long-term (°C)
450
Max. temp., short-term (°C)
500
Refractive index nd
1.473
Thermal conductivity
1.2
Elastic modulus E (10⁴ N/mm²)
6.4
Poisson's ratio μ
0.20
Hydrolytic class
HGB 1
Acid resistance
S 1
Alkali resistance
A 2

Reply within 24h

Request information

Tell us what you need about Duran® Borosilicate 3.3 Tubes, 2000 mm — technical information, a sample or a quote — and we will reply as soon as possible.

    FAQ

    Any questions? Ask us.

    01 / General

    • DURAN is a borosilicate 3.3 glass manufactured to ISO 3585, with a very low coefficient of thermal expansion (3.3·10⁻⁶ K⁻¹). Compared with conventional soda-lime glass, it withstands sudden temperature changes without cracking and offers far superior chemical resistance, making it the reference standard for laboratories and industry.

    • Hydrolytic class HGB1 and acid resistance class S1 (the highest on the scale), with a continuous working temperature of up to 450°C and a short-term working temperature of up to 500°C. It resists most acids, solvents and saline solutions without releasing components into the contents.

    • Yes. You can request a sample through the form on this page or by contacting us directly. Tell us the diameter and wall thickness you are interested in and we will prepare it for you.

    02 / Orders and lead times

    • It depends on the format and size requested. For standard catalogue sizes we do not usually require high minimums; for pieces or sizes outside the catalogue, the minimum quantity is usually around 50-100 units. Get in touch about your specific case.

    • Yes. We have our own glassblower at our facilities in Ripollet, which allows us to go beyond the standard catalogue: special geometries, bends, joints and prototypes, in the same glass grades we already supply. More information on our Custom-made page.

    • Tolerances vary depending on diameter and wall thickness. You can find them in the technical specifications table for each size, further up this page. For tighter tolerances than those in the catalogue, contact us so we can assess feasibility.

    03 / Shipping

    • Orders for catalogue sizes with stock available are usually shipped within a few working days. Custom or large-volume orders depend on the manufacturer’s production lead time, and we will give you the estimated lead time when confirming the order.

    • Yes, we supply orders throughout Europe. Contact us for other destinations and we will confirm lead times and shipping conditions.

    You may also be interested in

    Related products

    Official distributor of SCHOTT in Spain and Portugal