Skip to content
Vidrasa

AR-Glas® Soda-lime Tubing 9.1

Technical glass

AR-GLAS® 9.1 soda-lime glass

AR-Glas is a clear glass of the third hydrolytic class and belongs to the soda-lime glasses with a high percentage of alkali and alkaline-earth oxides. AR-Glas has a mean coefficient of linear expansion of 9.1.

AR-Glas® Soda-lime Tubing 9.1

Product

Advantages and applications

The advantages

The many possible applications, good value for money, easy processing and dimensional accuracy are AR-Glas's most outstanding features.

Quality

The quality of these products is backed by modern manufacturing technologies and a quality assurance system compliant with DIN ISO 9001, certified by TÜV-Cert.

Applications

AR-Glas has a broad range of applications: primary pharmaceutical and medical packaging, the cosmetics and food industries, laboratory ware and crafts. It is also increasingly used in lighting and decoration.

Description

AR-GLAS is a clear soda-lime glass of the 3rd hydrolytic class, with a mean coefficient of linear expansion of 9.1. It stands out for its good value for money, excellent processability and dimensional precision.

Its broad range of applications runs from primary pharmaceutical and medical packaging (medicines, pipettes) to the cosmetics and food industries. Quality is backed by an assurance system compliant with DIN ISO 9001, certified by TÜV-Cert.

It is classified as Type III glass (Hydrolytic Class HC3) according to international pharmacopoeias, and its relatively high coefficient of expansion makes it ideal for compression seals with platinum or dumet wire. It offers good transmission from UV-A to the near infrared, which extends its use to cosmetic and food-flavouring packaging as well as laboratory and pharmaceutical applications.

Besides its uses in laboratories, pharmaceuticals and food, AR-GLAS is also used as a starting material for technical items such as solar collectors, in glass crafts (Christmas ornaments) and, increasingly, in lighting and decoration.

Applications

What it is used for

  • 01 Primary pharmaceutical and medical packaging: disposable containers and pipettes
  • 02 Cosmetics and food industries
  • 03 Laboratory ware
  • 04 Solar collectors and other technical products
  • 05 Crafts and Christmas ornaments
  • 06 Lighting and decoration

Specifications

AR-GLAS® combines precise dimensions with exceptional properties

A wide range of tubing and rod dimensions makes AR-GLAS® a popular, economical choice in many fields. It offers very precise geometries and corrosion resistance, with a high coefficient of thermal expansion that makes it suitable for compression seals.

Dimensions

Find your size

Check the available sizes and take the following notes into account before placing your order.

  • Tube length approx. 1500 mm.
  • The quantities and weights shown are approximate values.
  • Tubes up to 8 mm outside Ø in cardboard boxes; the rest in Densopack packaging, with film shrink-wrapped over the ends to prevent the tubes from slipping and getting scratched.
  • In addition to the sizes shown, others can be supplied depending on quantity.
  • Made to order, tubes of Ø 5 to 30 mm with an outer anti-scratch coating (minimum purchase 2 t).
Request a quote
Outside diameter
Wall thickness (mm)
Weight per tube
Box contents
mm mm g / 1500 mm Number of tubes Approx. weight kg
4 ±0.09 0.50 ±0.02 21 582 12.0
±0.09 0.70 ±0.03 27 551 15.0
±0.12 0.90 ±0.03 33 548 18.0
5 ±0.09 0.50 ±0.02 27 378 10.0
±0.09 0.70 ±0.03 36 367 13.0
±0.12 0.90 ±0.03 44 386 17.0
6 ±0.10 0.50 ±0.02 33 618 20.0
±0.10 0.70 ±0.03 44 252 11.0
±0.10 0.90 ±0.03 54 278 15.0
±0.12 1.10 ±0.03 64 252 16.0
7 ±0.10 0.50 ±0.02 38 418 16.0
±0.10 0.70 ±0.03 52 193 10.0
±0.10 0.90 ±0.03 65 186 12.0
±0.12 1.10 ±0.03 77 196 15.0
8 ±0.10 0.50 ±0.02 44 380 16.8
±0.10 0.70 ±0.03 60 342 20.6
±0.10 0.90 ±0.03 76 266 20.0
±0.12 1.10 ±0.03 90 234 20.9
9 ±0.12 0.50 ±0.02 50 340 17.0
±0.12 0.70 ±0.03 69 289 19.8
±0.12 0.90 ±0.03 86 238 20.4
±0.14 1.10 ±0.03 103 204 20.9
10 ±0.12 0.60 ±0.03 67 270 17.9
±0.12 0.80 ±0.03 87 240 20.8
±0.14 1.00 ±0.03 106 165 17.5
±0.15 1.20 ±0.04 125 165 20.5
11 ±0.12 0.60 ±0.03 74 256 18.8
±0.12 0.80 ±0.03 96 208 20.2
±0.14 1.00 ±0.03 118 169 19.9
±0.15 1.20 ±0.04 139 143 19.8
12 ±0.12 0.60 ±0.03 51 238 19.2
±0.12 0.80 ±0.03 106 196 20.7
±0.14 1.00 ±0.03 130 156 20.2
±0.15 1.20 ±0.04 153 126 19.2
13 ±0.12 0.60 ±0.03 88 208 18.2
±0.12 0.80 ±0.03 115 182 20.9
±0.14 1.00 ±0.03 142 143 20.2
±0.15 1.20 ±0.04 167 117 19.5
14 ±0.12 0.60 ±0.03 95 180 17.0
±0.12 0.80 ±0.03 125 168 20.9
±0.14 1.00 ±0.03 154 120 18.4
±0.15 1.20 ±0.04 182 110 19.9
15 ±0.14 0.60 ±0.03 102 154 15.7
±0.14 0.80 ±0.03 134 143 19.1
±0.14 1.00 ±0.04 166 121 19.9
±0.18 1.20 ±0.04 196 100 19.5
16 ±0.14 0.60 ±0.03 109 143 15.6
±0.14 0.80 ±0.03 144 132 18.9
±0.14 1.00 ±0.04 177 110 19.4
±0.18 1.20 ±0.04 210 99 20.7
17 ±0.14 0.80 ±0.03 153 120 18.3
±0.14 1.00 ±0.04 189 100 18.8
18 ±0.18 0.80 ±0.03 163 110 17.8
±0.19 1.00 ±0.04 201 99 19.8
±0.19 1.20 ±0.04 238 81 19.2
±0.23 1.50 ±0.05 293 72 21.0
19 ±0.18 0.80 ±0.03 172 99 17.0
±0.19 1.00 ±0.04 213 90 19.1
±0.23 1.50 ±0.05 310 63 19.5
20 ±0.19 0.80 ±0.04 182 90 16.3
±0.19 1.00 ±0.04 224 90 20.1
±0.19 1.20 ±0.05 267 72 19.1
21 ±0.19 0.80 ±0.04 191 80 15.2
±0.19 1.00 ±0.04 236 80 18.8
22 ±0.19 0.80 ±0.04 201 72 14.4
±0.19 1.00 ±0.04 248 72 17.8
±0.19 1.20 ±0.05 295 64 18.8
23 ±0.19 0.80 ±0.04 209 63 13.2
±0.19 1.00 ±0.04 260 63 16.3
±0.23 1.50 ±0.05 381 49 18.6
24 ±0.19 1.00 ±0.04 272 56 15.2
±0.19 1.20 ±0.05 323 56 18.0
±0.23 1.50 ±0.05 399 49 19.5
25 ±0.19 0.80 ±0.04 229 56 12.8
±0.24 1.50 ±0.05 417 42 17.4
26 ±0.19 1.00 ±0.04 296 48 14.1
±0.24 1.20 ±0.05 352 48 16.8
±0.24 1.50 ±0.05 433 48 20.8
28 ±0.19 1.00 ±0.04 319 42 13.4
±0.24 1.20 ±0.05 380 42 15.9
±0.24 1.50 ±0.05 468 42 19.7
30 ±0.24 1.20 ±0.05 407 35 14.2
±0.29 1.50 ±0.06 503 35 17.6
32 ±0.24 1.20 ±0.05 435 30 13.1
±0.29 1.50 ±0.06 539 30 16.2
34 ±0.24 1.20 ±0.05 463 30 13.9
±0.29 1.50 ±0.06 574 30 17.2
36 ±0.40 1.20 ±0.06 492 20 9.8
±0.40 1.50 ±0.07 609 20 12.2
38 ±0.40 1.20 ±0.06 522 20 10.4
±0.40 1.50 ±0.07 645 20 12.9
40 ±0.50 1.20 ±0.08 550 20 11.0
±0.50 1.50 ±0.08 680 20 13.6
Made-to-order options

Additional sizes made to order, depending on quantity. Protective anti-scratch coating available for diameters from 5 to 30 mm (minimum order 2 tonnes).

Details

Technical data

Summary of the manufacturing tolerances for AR-Glas tubes and rods. Full details are in the Manufacturing tolerances section.

Length

Tubes: 1500 mm (+5/−0 mm). Rods: 1500 mm (±20 mm). Made to order, special lengths from 1200 to 4000 mm (Ø 18–38 mm) or any length shorter than 1500 mm.

Roundness

Maximum tolerance according to ISO 1101: 0.4 % of the outside Ø up to 25 mm, 0.6 % from 25 to 35 mm and 0.8 % above 35 mm.

Straightness

According to ISO 1101: 4.0 mm / 1500 mm for Ø 4–6 mm and 0.9 mm / 1000 mm for Ø above 6 mm.

Packaging

Tubes up to 8 mm Ø in cardboard boxes; the rest in Densopack packaging, with film shrink-wrapped over the ends to prevent slipping and scratching.

Technical Data

Manufacturing tolerances

Check the dimensional, mechanical and finish tolerances that apply to this product: length, roundness, straightness, tensile strength and packaging conditions.

AR-Glas® Soda-lime Tubing 9.1

AR-Glas® Soda-lime Tubing 9.1

Check the available sizes and request more information about this product.

  • Outside diameter and wall thickness as per the AR-Glas Tubing and AR-Glas Rod tables. On request we can supply tubes with an outside diameter of up to 70 mm and rods with an outside diameter of up to 30 mm, as well as wall thicknesses in addition to those included in the range shown.

  • Standard lengths are as follows:

    Tubes
    1500 mm (+5/-0 mm)
    Rods
    1500 mm (±20 mm)

    For tubes with outside diameters from 18 to 38 mm, special lengths from 1.200 to 4.000 mm can be requested. To order, we supply tubes and rods in any length shorter than 1500 mm.

  • The circumference line of each cross-section of a piece under inspection must lie between two concentric circles in the same plane, at a distance t from each other. In accordance with ISO 1101, this tolerance zone t represents the roundness tolerance. It depends on the nominal value of the outside diameter (OD). The following maximum values are set:

    < 25 mm
    0.4% of the outside diameter
    25 – 35 mm
    0.6% of the outside diameter
    > 35 mm
    0.8% of the outside diameter
  • Wall thickness difference is the difference between the maximum and minimum wall thickness in one measuring plane.

    < 0.80 mm
    6% of the wall thickness
    ≥ 0.80 mm
    7% of the wall thickness
  • Straightness in accordance with ISO 1101 is the maximum distance of the surface points of a piece under inspection from an adjacent line of ideal geometric form. Projected onto a plane, this is the tolerance zone t, bounded by two parallel straight lines. The following maximum values are set:

    4 – 6 mm
    4.0 mm / 1500 mm
    > 6 mm
    0.9 mm / 1000 mm
  • Longitudinal
    max. 4.0 MPa
    Concentric
    max. 4.5 MPa
  • Stones are non-transparent inclusions; knots are transparent inclusions. They are defect indicators that depend on the glass mass. The core is taken as the basis for measurement. Stones and knots with a core size ≥ 0.5 mm are considered defects.

  • Cords are elongated gaseous inclusions inside the tube, which normally cannot be detected by the human eye. We call the sum of the lengths of all cords > 15 mm the cord length (that is, where two or more cords overlap, the distance between the outer ends of the cords). We consider an accumulated cord length > 1.00 m per 10 m of tube to be a defect.

  • Tubes. End finish: cut ends or flame-polished ends. Standard: vial-type flame polishing with a rim thickness of 0.15 mm.

    Light flame polishing
    0.05 mm
    Medium flame polishing
    0.10 mm
    Heavy flame polishing
    0.20 mm

    Rods. No finishing.

  • A scratch is slight surface damage that does not penetrate deeply into the glass wall or go through it, and so reduces the mechanical strength of the glass only very insignificantly.

  • Tubes of up to 8 mm outside diameter are supplied packed in cardboard boxes; all others are supplied in Densopack packaging: a film is shrink-wrapped over each end of the tube bundles, which prevents the tubes from slipping and getting scratched. This method offers greater load resistance and improved safety during transport.

Properties

Soda-lime 9.1

Coeff. of expansion 20/300 [10⁻⁶·K⁻¹]
9.1
Transformation temp. (°C)
525
Annealing / strain point temp. (°C)
530
Softening temp. (°C)
720
Working temp. (°C)
1040
Max. temp., long-term (°C)
—
Max. temp., short-term (°C)
450
Refractive index nd
1.514
Thermal conductivity
1.1
Elastic modulus E (10⁴ N/mm²)
7.3
Poisson's ratio μ
0.22
Hydrolytic class
HGB 3
Acid resistance
S 1
Alkali resistance
A 2

Reply within 24h

Request information

Tell us what you need about AR-Glas® Soda-lime Tubing 9.1 — technical information, a sample or a quote — and we will reply as soon as possible.

    FAQ

    Any questions? Ask us.

    01 / General

    • AR-GLAS is a clear soda-lime glass (Type III / Hydrolytic Class HC3) with good dimensional precision and excellent value for money. It is used in pharmaceutical and medical packaging, pipettes, and in the cosmetics and food industries.

    • AR-GLAS is soda-lime glass with a higher coefficient of expansion than DURAN (borosilicate), which makes it ideal for compression seals with platinum or dumet wire. Its chemical resistance is somewhat lower than DURAN’s, but it offers better value for money in applications that do not require maximum thermal resistance.

    • Yes, quality is backed by an assurance system compliant with DIN ISO 9001, certified by TÜV-Cert.

    02 / Orders and lead times

    • It depends on the format and size requested. For standard catalogue sizes we do not usually require high minimums; for pieces or sizes outside the catalogue, the minimum quantity is usually around 50-100 units. Get in touch about your specific case.

    • Yes. We have our own glassblower at our facilities in Ripollet, which lets us go beyond the standard catalogue: special geometries, bends, joints and prototypes. More information on our Custom-made page.

    • Tolerances vary according to diameter and thickness — you can check them in the technical specifications table on this page. For tighter tolerances than the catalogue ones, contact us so we can assess feasibility.

    03 / Shipping

    • Orders for catalogue sizes with stock available are usually shipped within a few working days. Custom or large-volume orders depend on the manufacturer’s production lead time, and we will give you the estimated lead time when confirming the order.

    • Yes, we supply orders throughout Europe. Contact us for other destinations and we will confirm lead times and shipping conditions.

    You may also be interested in

    Related products

    Official distributor of SCHOTT in Spain and Portugal